Masonry Repairs – What You Should Know Before You Begin
Repairing your brick or stone masonry is a huge project for homeowners. But before you start breaking out the tools and measuring tape, it is important to know what to expect. By knowing what to expect, you can be prepared and know who to call for help. This blog will help you understand the basics of what you should expect before you begin the project.
What is Masonry?
Masonry is the art of building with stone, brick, concrete, and other similar building materials. It is a type of construction that is common in many parts of the world, with a history dating back to the Stone Age. Masonry construction is based on the principle of structural stability, which means that the weight of the materials being used are transferred gradually to the ground and other building elements to help maintain the structure.
Masonry repairs types
The first thing that you should know about masonry is that it is not easy to repair and can only be repaired by mason or masonry contractor. There are two types of masonry repairs, which are repair and restoration. The repair method means that the damaged area is filled up with new material, whereas the restoration is done in such a way that the original appearance is maintained.
When to Repair
If the damage is minor and it is in the form of cracking or breaking, then you can do the repair in your own. For that, you need to mix sand and cement and pour it into the crack.
If the damage is more severe then you need to contact an expert. A Fredericton masonry repairs will provide you with the best and the easiest way of repairing. It is the most common method of repairing masonry cracks.
When to Restore
If the damage is severe then it can be repaired using the restoration method. This method is usually used when the walls are severely damaged and need complete or partial restoration. The mason will remove the damaged area and then fill it up with new materials.
Usually the mason will cut out the damaged area and then replace it with a new piece of wall material. The wall material used to repair the walls is normally mortar. The mason will mix the mortar with sand and water to form a paste. The wall material should have a consistency similar to pancake batter. You must be careful to avoid spilling the paste because it could drip on your clothes or the floor. After spreading the paste, wait for about 20 to 30 minutes. The paste will start to set and become dry. The wall will look much better after this process. The wall will not be as hard as before. You can now see the new wall material. You must also make sure that the wall doesn’t have any gaps in it.
In conclusion, masonry repairs are one of the most common repairs, so you need to know about them. It is advisable whenever you notice any damage to your masonry do repair yourself or in case if you find major damage then call your nearest professional to repair the damage immediately.