How to Repair a Broken Pool Filter

How to Repair a Broken Pool Filter

Did you know that a pool filter is one of the essential parts of a swimming pool? Not only does it help keep the water clean, but it also helps to maintain the pH balance and chlorine levels. If your pool filter breaks, don’t worry – we’ll show you how to fix it!

There are two main types of pool filters – cartridge and sand. Pool Repair Weatherford professionals can quickly repair both types with simple steps.

Cartridge pool filters are the most common type of pool filter. To repair a broken cartridge pool filter, you will need to:

– Remove the cartridge from the filter housing

– Inspect the cartridge for any tears or holes

– If there are any damaged areas, use a pool filter repair kit to patch them up

– Put the cartridge back into the housing and tighten all of the screws

– Turn on the filter and check for leaks

Sand pool filters are less common but can still be found in some pools. To repair a broken sand pool filter, you will need to:

– Remove the sand from the filter housing

– Inspect the sand for any clumps or dirt

– If the sand is dirty, clean it with a hose

– If the sand is clumped, break up the clumps with your fingers

– Put the sand back into the housing and tighten all of the screws

– Turn on the filter and check for leaks

Pool filters are less common than cartridge or sand filters, but they can still be found in some pools. To repair a broken diatomaceous earth pool filter, you will need to:

See also  7 Must Haves For Your Luxury Bathroom Renovation

– Remove the diatomaceous earth from the filter housing

– Inspect the diatomaceous earth for any clumps or dirt

– If the diatomaceous earth is dirty, clean it with a hose

– If the diatomaceous earth is clumped, break up the clumps with your fingers

– Put the diatomaceous earth back into the housing and tighten all of the screws

– Turn on the filter and check for leaks. If there are no leaks, your pool filter is fixed!

It is essential to regularly inspect your pool filter to make sure that it is in good working condition. If you notice any cracks or leaks, be sure to repair them immediately to avoid further damage. Hiring a reputable pool company to do the job is always the best option to ensure it is done correctly. To guarantee you hire the right repair company, here are a few tips: 

-Get referrals from friends or family who have recently had pool repairs done. 

-Check online reviews to get an idea of a company’s quality of work and customer service. 

-Ask the company for proof of insurance and licenses. 

-Get multiple estimates to compare prices and services. 

By following these tips, you can be sure that your pool filter will be repaired properly, and you’ll be able to enjoy your pool all summer long!

We hope this article was helpful. If you have any further questions, please feel free to reach out to us. We’re always happy to help!

Similar Posts

Leave a Reply

Your email address will not be published.